| Poliovirus | |
|---|---|
| TEM micrograph of poliovirus virions. | |
| Virus classification | |
| Group: | Group IV ((+)ssRNA) |
| Order: | Picornavirales |
| Family: | Picornaviridae |
| Genus: | Enterovirus |
| Type species | |
| Human enterovirus C |
|
| Species | |
|
Human enterovirus C [1] |
|
Poliovirus, the causative agent of poliomyelitis, is a human enterovirus and member of the family of Picornaviridae.[2]
Poliovirus is composed of an RNA genome and a protein capsid. The genome is a single-stranded positive-sense RNA genome that is about 7500 nucleotides long.[3] The viral particle is about 30 nanometres in diameter with icosahedral symmetry. Because of its short genome and its simple composition—only RNA and a non-enveloped icosahedral protein coat that encapsulates it—poliovirus is widely regarded as the simplest significant virus.[4]
Poliovirus was first isolated in 1909 by Karl Landsteiner and Erwin Popper.[5] In 1981, the poliovirus genome was published by two different teams of researchers— by Vincent Racaniello and David Baltimore at MIT[6] and by Naomi Kitamura and others at the State University of New York, Stony Brook.[7] Poliovirus is one of the most well-characterized viruses, and has become a useful model system for understanding the biology of RNA viruses.
Contents |
Poliovirus infects human cells by binding to an immunoglobulin-like receptor, CD155, (also known as the poliovirus receptor (PVR))[9][10] on the cell surface.[11] Interaction of poliovirus and CD155 facilitates an irreversible conformational change of the viral particle necessary for viral entry.[12][13] The precise mechanism poliovirus uses to enter the host cell has not been firmly established.[14] Attached to the host cell membrane, entry of the viral nucleic acid was thought to occur one of two ways: via the formation of a pore in the plasma membrane through which the RNA is then “injected” into the host cell cytoplasm, or that the virus is taken up by receptor-mediated endocytosis.[15] Recent experimental evidence supports the latter hypothesis and suggests that poliovirus binds to CD155 and is taken up via endocytosis. Immediately after internalization of the particle, the viral RNA is released.[16] However, any mechanism by which poliovirus enters the cell is very inefficient; as an infection is initiated only about 1% of the time.[17]
Poliovirus is a positive stranded RNA virus. Thus the genome enclosed within the viral particle can be used as messenger RNA and immediately translated by the host cell. On entry the virus hijacks the cell's translation machinery; causing inhibition of cellular protein synthesis in favor of virus–specific protein production. Unlike the host cell's mRNAs the 5' end of poliovirus RNA is extremely long—over 700 nucleotides—and is highly structured. This region of the viral genome is called internal ribosome entry site (IRES) and it directs translation of the viral RNA. Genetic mutations in this region prevent viral protein production.[18][19][20]
Poliovirus mRNA is translated as one long polypeptide. This polypeptide is then auto-cleaved by internal proteases into approximately 10 individual viral proteins, including:[4][17]
The assembly of new virus particles, (i.e. the packaging of progeny genome into a capsid which can survive outside the host cell) is not fully understood.[15] Fully assembled poliovirus leaves the confines of its host cell 4 to 6 hours following initiation of infection in cultured mammalian cells.[21] The mechanism of viral release from the cell is unclear,[3] but each dying cell can release up to 10,000 polio virions.[21]
Poliovirus is structurally similar to other human enteroviruses (coxsackieviruses and echoviruses), as well as to human rhinoviruses, which also use immunoglobulin-like molecules to recognize and enter host cells.[10] Phylogenetic analysis of the RNA and protein sequences of poliovirus (PV) suggests that PV may have evolved from a C-cluster coxsackie A virus ancestor, that arose through a mutation within the capsid.[22] The distinct speciation of poliovirus probably occurred as a result of change in cellular receptor specificity from intercellular adhesion molecule-1 (ICAM-1), used by C-cluster coxsackie A viruses, to CD155; leading to a change in pathogenicity, and allowing the virus to infect nervous tissue.
The mutation rate in the virus is relatively high even for an RNA virus with a synonymous substitution rate of 1.0 x 10-2 substitutions/site/year and non synomymous subtitution rate of 3.0 x 10-4 substitutions/site/year.[23] Base distribution within the genome is non random with adenosine being less common than expected at the 5' end and higher at the 3' end.[24] Codon use is non random with codons ending in adenosine being favourec and those ending in cytosine or guanine being avoided. Codon use differs between the three genotypes and appears to be driven by mutation rather than selection.[25]
There are three serotypes of poliovirus, PV1, PV2 , and PV3; each with a slightly different capsid protein. Capsid proteins define cellular receptor specificity and virus antigenicity. PV1 is the most common form encountered in nature, however all three forms are extremely infectious.[5] Wild polioviruses can be found in approximately 10 countries. PV1 is highly localized to regions in India, Pakistan, Afghanistan, and Egypt, but following outbreaks of poliomeyletis in 2003–2004 it remains widespread in West and Central Africa. Wild poliovirus type 2 has probably been eradicated; it was last detected in October 1999 in Uttar Pradesh, India.[26] Wild PV3 is found in parts of only five countries (Nigeria, Niger, Pakistan, India, and Sudan).[21]
Specific strains of each serotype are used to prepare vaccines against polio. Inactive polio vaccine (IPV) is prepared by formalin inactivation of three wild, virulent reference strains, Mahoney or Brunenders (PV1), MEF-1/Lansing (PV2), and Saukett/Leon (PV3). Oral polio vaccine (OPV) contains live attenuated (weakened) strains of the three serotypes of poliovirus. Passaging the virus strains in monkey kidney epithelial cells introduces mutations in the viral IRES, and hinders (or attenuates) the ability of the virus to infect nervous tissue.[21]
Polioviruses were formerly classified as a distinct species belonging to the genus Enterovirus in the family Picornaviridae. In 2008 the Poliovirus species was eliminated from the genus Enterovirus and the three serotypes were assigned to the species Human enterovirus C, in the genus Enterovirus in the family Picornaviridae. The type species of the genus Enterovirus was changed from Poliovirus to Human enterovirus C.[27]
The primary determinant of infection for any virus is its ability to enter a cell and produce additional infectious particles. The presence of CD155 is thought to define the animals and tissues that can be infected by poliovirus. CD155 is found (outside of laboratories) only on the cells of humans, higher primates, and Old World monkeys. Poliovirus is however strictly a human pathogen, and does not naturally infect any other species (although chimpanzees and Old World monkeys can be experimentally infected).[28]
The CD155 gene appears to have been subject to positive selection.[29] The protein has several domains of which domain D1 contains the polio virus binding site. Within this domain 37 amino acids are responsible for binding the virus.
Poliovirus is an enterovirus. Infection occurs via the fecal-oral route, meaning that one ingests the virus and viral replication occurs in the alimentary tract.[30] Virus is shed in the feces of infected individuals. In 95% of cases only a primary, transient presence of viremia (virus in the bloodstream) occurs, and the poliovirus infection is asymptomatic. In about 5% of cases, the virus spreads and replicates in other sites such as brown fat, reticuloendothelial tissue, and muscle. The sustained viral replication causes secondary viremia and leads to the development of minor symptoms such as fever, headache and sore throat.[31] Paralytic poliomyelitis occurs in less than 1% of poliovirus infections. Paralytic disease occurs when the virus enters the central nervous system (CNS) and replicates in motor neurons within the spinal cord, brain stem, or motor cortex, resulting in the selective destruction of motor neurons leading to temporary or permanent paralysis. In rare cases, paralytic poliomyelitis leads to respiratory arrest and death. In cases of paralytic disease, muscle pain and spasms are frequently observed prior to onset of weakness and paralysis. Paralysis typically persists anywhere from days to weeks prior to recovery.[32][33]
In many respects the neurological phase of infection is thought to be an accidental diversion of the normal gastrointestinal infection.[15] The mechanisms by which poliovirus enters the CNS are poorly understood. Three non-mutually exclusive hypotheses have been suggested to explain its entry. All theories require primary viremia. The first hypothesis predicts that virions pass directly from the blood into the central nervous system by crossing the blood brain barrier independent of CD155.[34] A second hypothesis suggests that the virions are transported from peripheral tissues that have been bathed in the viremic blood, for example muscle tissue, to the spinal cord through nerve pathways via retrograde axonal transport.[35][36][37] A third hypothesis is that the virus is imported into the CNS via infected monocytes or macrophages.[8]
Poliomyelitis is a disease of the central nervous system. However, CD155 is believed to be present on the surface of most or all human cells. Therefore receptor expression does not explain why poliovirus preferentially infects certain tissues. This suggests that tissue tropism is determined after cellular infection. Recent work has suggested that the type I interferon response (specifically that of interferon alpha and beta) is an important factor that defines which types of cells support poliovirus replication.[38] In mice expressing CD155 (through genetic engineering) but lacking the type I interferon receptor, poliovirus not only replicates in an expanded repertoire of tissue types, but these mice are also able to be infected orally with the virus.[39]
Poliovirus uses two key mechanisms to evade the immune system. First, it is capable of surviving the highly acidic conditions of the gastrointestinal tract, allowing the virus to infect the host and spread throughout the body via the lymphatic system.[4] Second, because it can replicate very quickly, the virus overwhelms the host organs before an immune response can be mounted.[6]
Individuals who are exposed to poliovirus, either through infection or by immunization with polio vaccine, develop immunity. In immune individuals, antibodies against poliovirus are present in the tonsils and gastrointestinal tract (specifically IgA antibodies) and are able to block poliovirus replication; IgG and IgM antibodies against poliovirus can prevent the spread of the virus to motor neurons of the central nervous system.[21] Infection with one serotype of poliovirus does not provide immunity against the other serotypes, however second attacks within the same individual are extremely rare.
Although humans are the only known natural hosts of poliovirus, monkeys can be experimentally infected and they have long been used to study poliovirus. In 1990-91, a small animal model of poliomyelitis was developed by two laboratories. Mice were engineered to express a human receptor to poliovirus (hPVR).[40][41]
Unlike normal mice, transgenic poliovirus receptor (TgPVR) mice are susceptible to poliovirus injected intravenously or intramuscularly, and when injected directly into the spinal cord or the brain.[42] Upon infection, TgPVR mice show signs of paralysis that resemble those of poliomyelitis in humans and monkeys, and the central nervous systems of paralyzed mice are histocytochemically similar to those of humans and monkeys. This mouse model of human poliovirus infection has proven to be an invaluable tool in understanding poliovirus biology and pathogenicity.[43]
Three distinct types of TgPVR mice have been well studied:[44]
Recently a fourth TgPVR mouse model was developed. These "cPVR" mice carry hPVR cDNA, driven by a β-actin promoter, and have proven susceptible to poliovirus through intracerebral, intramuscular, and intranasal routes. In addition, these mice are capable of developing the bulbar form of polio after intranasal inoculation.[45]
The development of the TgPVR mouse has had a profound effect on oral poliovirus vaccine (OPV) production. Previously, monitoring the safety of OPV had to be performed using monkeys, because only primates are susceptible to the virus. In 1999 the World Health Organization approved the use of the TgPVR mouse as an alternative method of assessing the effectiveness of the vaccine against poliovirus type-3. In 2000 the mouse model was approved for tests of vaccines against type-1 and type-2 poliovirus.[46]
In 1981 Racaniello and Baltimore used recombinant DNA technology to generate the first infectious clone of an animal RNA virus, poliovirus. DNA encoding the RNA genome of poliovirus was introduced into cultured mammalian cells and infectious poliovirus was produced.[47] Creation of the infectious clone propelled understanding of poliovirus biology, and has become a standard technology used to study many other viruses.
In 2002 researchers at SUNY Stony Brook succeeded in synthesizing poliovirus from its chemical code, producing the world's first synthetic virus.[48] Scientists first converted poliovirus's published RNA sequence, 7741 bases long, into a DNA sequence, as DNA was easier to synthesize. Short fragments of this DNA sequence were obtained by mail-order, and assembled. The complete viral genome was then assembled by a gene synthesis company. This whole painstaking process took two years. Nineteen markers were incorporated into the synthesized DNA, so that it could be distinguished from natural poliovirus. Enzymes were used to convert the DNA back into RNA, its natural state. Other enzymes were then used to translate the RNA into a polypeptide, producing functional viral particle. The newly minted synthetic virus was injected into PVR transgenic mice, to determine if the synthetic version was able to cause disease. The synthetic virus was able to replicate, infect, and cause paralysis or death in mice. However, the synthetic version was between 1,000 and 10,000 times less lethal than the original virus.[49]
|
||||||||||||||||||||||||||||||||||||||||||||||||